Review Of The Anabat Swift Bat Detector from Titley Scientific - Part 2 Of 3...

Review Of The Anabat Swift Bat Detector from Titley Scientific - Part 2 Of 3
 

Very nice protective case included with AnaBat Swift

When it comes to any technology kit, I've always been an advocate for reading the User Manual. As a summary, I'll point out some areas which will help provide an overview of The AnaBat Swift.

While first "Jumping around" inside The User Manual, some of the pages I was drawn to were:

Page 4 - Features of the Anabat Swift

Page 5 - Getting Started

Page 9 - AnaBat Swift basic operation

Colour touchscreen displays the system's status at a glance.

The AnaBat Swift's System > Status screen

In practice, using the headphone output jack, to listen-in while recording bats, is about what one might expect: The sounds heard via the headphones, sounds like a typical frequency division bat detector. Nothing fancy here.
However, the addition of an inexpensive external speaker, can add another dimension to this passive bat detector.

In my case, a quick rummaging around in my electronics box turned-up a simple amplified speaker (from RadioShack). This turned-out to be a perfect fit for my intended purpose:
Which was to have The AnaBat Swift function as an active monitor, for live bat calls as well (while simultaneously recording). This is ideal for "deploying" the (opened) unit on a windowsill. Setting-up bat detectors on windowsills, is a practice which I've been quite fond of over the years.
I haven't had a chance to try an ordinary speaker; and I'm not yet sure if the headphone output jack (3.5mm) would be able to drive one. But a small amplified speaker is probably best suited for the purpose anyway.

Small amplified speaker, connected to the Headphone jack (via 3.5mm audio patch cable).

I should remind the reader, that using the Headphone output in this manner is just an idea I had; just something to try. Not something mentioned by Titley. If you decide to try it, your results may vary (depending on the amplified speaker used). You may find (as I did) that the audio produced in a typical pair of (inexpensive/generic) headphones is a lot more pleasing.

Fortunately for me, this is the view out of my (current) windowsill:

Where I point my bat detectors, for quick, nightly tests.

The AnaBat Swift, with Omnidirectional Mic, routinely creates good quality recordings at respectable distances. The water's edge, of the lake pictured above, is a favorite flyway of Big Brown Bats (Eptesicus Fuscus). And it lies approximately 40 meters distant.

AnaBat Insight

•  Opening recordings:

File > Open > Open Directory 
The directory is then loaded, and appears on the left hand side of the screen. 

• Playing back the files, my take:

Pitch Shift - Sounds pleasing, very basic.
Heterodyne - Sounds pleasing, strong and clear (probably my favorite).
Comb Filter - Sounds pleasing, subdued/lower.
Frequency Division - Sounds great when using ZC recorded files. Not for listening to full spectrum recorded files.
A couple of spectrograms below, recorded with The AnaBat Swift.

 

Big Brown Bat pass (Eptesicus fuscus) - Viewed with AnaBat Insight's default settings with FS (Spectrogram) and Zero Crossing selected.

Another Big Brown Bat pass (Eptesicus fuscus) - Viewed with AnaBat Insight (there are a myriad of customization's and colors available).

I like the Metrics, and the Metadata display areas, on the right-hand side of the AnaBat Insight screen. 
For Frequency Division, the multiplying factors available are: 4, 8, 16, 32. I would like to see '10' as an option, so that results from low-cost bat detectors can be accurately played. Obviously, this is just a minor point.

I like the touch colour screen on this unit. I found that I had to re-calibrate the touch screen a few times, to get it to my liking. In general, I like the way the screen menus are laid-out. There is also a Force Screen On option, useful for using the unit as an active monitor. As in using a connected headphone or speaker, as mentioned previously. It ensures that the screen doesn't go into sleep mode (battery power consumption is increased).
I like the way the AnaBat Insight software informs you when an update is available.
It gives you a complete overview of what is about to take place - See screen shot below:

Thorough update information.

Other sections of the AnaBat Insight Manual, which I found useful were:

• Frequency Scale (Page 14) - Info on how to change and customize (your own) frequency scale.

• Time Scale (Page 15)
• Trigger Settings (Page 16)
• Graph Colours (page 17)
• Spectrogram De-Noise (Page 19) - Caused the application to crash, on more than one occasion.
• View Power Graph (Page 20)
• Audio Modes (Page 25) - Brief explanations of each audio mode.

 

A ZC recording of a bat pass, in Dark Mode. Mouse pointer held over one of the pulses, provides temporary pop-up of Metrics.

As is the custom with unattended bat recorders, The AnaBat Swift automatically produces a Log File. And, as I've mentioned in the past, it reminds me of log files which computer servers create. For those who are interested, here is a typical example of such a log file, from The AnaBat Swift:

,INFO,Power Button Wakeup
,RTCBATT,3.24
16:58:09,POWER,on
16:58:09,INFO,GUI start
16:58:09,INFO,night mode start 20:01 end 5:57
16:58:09,INFO,Status: Insert an SD card
16:58:10,TEMP,53.7        -------- I really like this feature.
16:58:10,BATT,5.20
16:58:10,BATT,5.17
16:58:10,INFO,CPU usage 78%
16:58:10,INFO,sd card 1 inserted
16:58:10,INFO,Status: Please wait
16:58:11,INFO,CPU usage 72%
16:58:13,BATT,5.08
16:58:13,INFO,card 1 in use 30.5G free
16:58:14,DATE,2019-07-03
16:58:14,TIME,16:58:14 -4:00
16:58:14,INFO,Anabat Swift
16:58:14,INFO,Hardware Rev 2.0
16:58:14,INFO,Device ID Private
16:58:14,INFO,Software 1.4 (master/d035424)
16:58:14,INFO,Bootloader 1.0 (jro-4723/1db4759)
16:58:14,INFO,Recording div 8 ZC files
16:58:14,INFO,Transect Off
16:58:14,INFO,Max file length 12s
16:58:14,INFO,Analog HP filter On        -------- (High Pass) I like this feature.
16:58:14,INFO,Sensitivity is 10
16:58:14,INFO,Trigger Freq 15kHz to 155kHz  -------- Allows you to tighten the recording window.
16:58:14,INFO,Min event 2ms
16:58:14,INFO,Trigger window 2s
16:58:14,INFO,Recording mode is Night
16:58:14,INFO,Status: Next recording at 20:01
16:59:09,INFO,User inactive for 60 seconds
16:59:14,INFO,GUI stop

Further to my comments on the Log File above, the usefulness of a temperature sensor is obvious. A High Pass filter is also a welcomed feature, useful for recording in diverse environments (where other wildlife are present, etc.). The ability to limit the frequency range of the unit's trigger, is very useful for narrowing-in on the species of bat you're after. In other words, you can change the range of frequencies which the Swift responds to.
For example, if you were recording bats in the Northeastern United States, you might try changing the settings to 15kHz to 90kHz.

Part 3 of 3 of this AnaBat Swift review, will cover the differences seen and heard when using the various microphones, which should be available for purchase soon. 
Of course, the Directional Mic is currently available / stocked by most Dealers, etc.

On to The AnaBat Walkabout review! ...In progress...

Happy bat detecting!

Review Of The Anabat Swift Bat Detector from Titley Scientific - Part 1 Of 3

Review of The Anabat Swift passive bat detector from Titley Scientific - Part 1 of 3

My 6 Yr old Nephew, Gabriel - Displaying The AnaBat Swift box

The unit arrived to me here in The U.S., from Australia, well packaged. An appropriately-sized cardboard box was used, as well as well-placed blocks of dense foam (for cushioning/protection). 

The unit arrived in perfect condition, just as if it only traveled 16 Kilometers (instead of the actual 16,918!).

Box Arrived Via FedEx

Neat Sticker included

 

The Anabat Swift measures 182 x 119 x 43mm (7.2 x 4.7 x 1.7 inches), and weighs in at 400 grams (14Oz).

 

The base price of The Swift, is currently listed at $999 (US dollars). You have a choice between two available microphones, direct from Titley:

An Omni-Directional Mic (priced at $175 US Dollars).

Omni-Directional Microphone
(original)

-Or-

A Directional Microphone (priced at $275 US Dollars). 

Directional Microphone

Prices vary a bit, depending on where you order, etc. As always, I urge you to shop around. (Prices noted above, are at the time of this writing [June 2019]). Additional links to Dealers, may be found towards the end of this post.

AnaBat Swift in it's box

The Anabat Swift unit I received for testing, was provided with the (original) Omni-directional Mic. 

A few weeks from now, I will be loaned:

• A prototype of their latest, improved Omni-directional Mic. Someone at Titley informed me that this Omni microphone, will have better performance compared to the current (original) model. 

- And -

• A Directional Mic, whose key features are: "A lower noise floor, and better high frequency (over 100kHz) sensitivity compared to the Omni microphone."

I am anxious to test them, and share my findings, etc. For now, we will discuss the original AnaBat Swift, and Omni Mic (as it has been offered to the public since it's release).

This unit is designed to be an efficient, passive bat recorder; with many high-end features (which professionals will find very useful). Among it's features are:

• A choice between Full Spectrum and Zero Crossing recording modes.
• A choice of 320 or 500 kHz sampling rates.
• Color touch screen.
• Built-in GPS.
• Automatic Night Mode Scheduling.
• Two SD card slots (512GB capacity each).
• A choice of being powered by either 4 or 8 AA batteries.
• A headphone audio output, for listening to bat calls in real time (frequency division).
• Excellent battery life - Able to record in full spectrum, for over 50 nights, using 8 AA sized batteries.
• Ability to be powered via a 6 or 12 volt battery, with optional fused power lead cable.
• Can be used for transects, utilizing built-in GPS (which updates location each second).
• An optional Security Box is also available.

AnaBat Swift in included case (Quickstart guide seen on the left)

The Swift has a neat, lightweight design, which is also robust. When holding one in your hand, you realize that it is built to easily withstand inclement weather. It's solid build is reminiscent of The AnaBat Express. 
Having had a (very low-cost) Trail camera recently suffer a moisture breach - I have even more appreciation for well-designed, weather proof equipment.  

AnaBat Swift, Ready for deployment

The Anabat Swift is easy to program, set-up, and use - not long after removing it from it's box. 
I was pleased to see that Titley provides a printed Quickstart User Guide (right inside the box).
Here is a "whittled-down" re-cap of the steps, from The Quickstart User Guide:

• Insert batteries
• Set time zone (the built-in GPS will do the rest)
• Connect microphone
• Select recording mode (Zero Cross or Full Spectrum)
• Select schedule 
• Close-up unit, and deploy

Again, what I've listed above, is the cliff notes version - Just to give the reader an idea of how easily the unit can be deployed. I urge you to take your time with the Quickstart Guide, since it provides some excellent tips!

 

This passive bat detector/recorder, would be an excellent choice for anyone wishing to record bats in an unattended manner - And is ideally suited to those who work with bats in a professional capacity.
The AnaBat Swift would be a good choice for anyone needing to deploy one or more passive bat recorders in the field, for extended periods of time. 
Collecting your recordings is easy: Open the Swift, and either:

• Tap on the SD card Eject symbol on the touch screen, status will read "Ejected".
• Power off the unit, and then remove SD card.

Listening to bats via the FD audio out port

The User Manual, is concise and well laid out. It contains a wealth of information, and I urge you to have a look.

During my test period (so far), I have found The AnaBat Swift to be accurate in it's recordings (in regard to other passive bat recorders I've tested). One of the things which struck me straight away, was how clean the resulting spectrograms appeared (both in FS and ZC mode). The ZC example below, was made by simply using the default settings of AnaBat Insight:

ZC Recording of Lasionycteris Noctivagans (Silver-Haired Bat) As seen in AnaBat Insight

Since using the latest versions, of both AnaBat Insight and BCID (Bat Call ID) Software - Something unexpected has happened:

• I've discovered a new found interest in the Zero Crossing method. A rekindled admiration of it, one might say.

If I had to choose just one method, I'd still choose Full Spectrum over ZC. But, lately, I've found myself using it more than any other method available. I will share some additional spectrograms (both Zero Crossing and Full Spectrum) in Part 2 of this review.

Pros:

•  Versatility of either Full Spectrum or Zero Cross recording.
•  Choice of 4 or 8 batteries/Long battery life.
•  Easy set-up/deployment.
•  Anabat Insight software is free.

Cons:

• May be considered expensive
• Microphone(s) must be purchased separately.

There are 3 main locations of Titley Scientific (AU, UK, and US). And there are plenty of authorized distributors World-wide as well, NHBS in The UK being one:



Things I liked: 

•  Colour screen.
•  The headphone output, for listening to bats in real time (frequency division).
•  Super-easy to deploy.

Things I didn't like:

•  I found myself wishing that the battery connection points were just a tiny bit sturdier. Some may consider this to be "nitpicky" but there it is.

For thoughts on:

• The AnaBat Insight software, and spectrograms

Please see Part 2 of 3 of this review 

July 2019 - Update: This will need to be a 3 Part review; since I will be testing two additional microphones with this AnaBat Swift. Part 3 of 3 will be primarily focused on my assessment and findings while testing them. This will include:

• The Directional Microphone vs. Omnidirectional
• The new, improved, Omnidirectional Microphone (vs. the original Omni Mic)
• The resulting spectrograms in regards to the above

Happy bat detecting!

The Next Bat Detectors To Be Reviewed! From Titley Scientific

I'm very happy to report, that two new bat detectors have arrived for review! 

Both from Titley Scientific, they are:

The Anabat Swift (passive) bat detector

 

-And-

The Anabat Walkabout (active) bat detector

 

And, there's more great news: I'll also be given the unique privilege to test and review one of the very first Anabat Scout bat detectors! - These are so new, that they have just been made available for purchase. 



I will be provided with an Anabat Scout to test, in about a month.

Stay tuned!

Happy bat detecting!

Review Of The Echo Meter Touch 2 Pro Part 2 Of 2

Review Of The Echo Meter Touch 2 Pro from Wildlife Acoustics - Part 2 Of 2

In Part 1 of this review, I covered the hardware and some of the basics of The Echo Meter Touch 2 (Pro). In this Post, there will be a lot more to cover!
As many of you are already aware of (by now) The Echo Meter Touch 2, is very commonly referred to as The EM Touch 2. And again, there is The Echo Meter Touch 2, and the Pro version available from Wildlife Acoustics.
The regular EM Touch 2 being an excellent choice for hobbyists & citizen scientists, while The EM Touch 2 Pro has more advanced features/settings, best suited for professionals.

A quick summary, of the EM Touch 2 devices, might read as follows:

The EM Touch 2:

• Excellent for anyone with an interest in detecting (and identifying) bats.
• Very intuitive to use.
• Plenty of features and abilities, to keep a budding naturalist busy (and happy!)

The EM Touch 2 Pro:

• Boasts enough (useful) features to enthuse even the most experienced professional.
• Opportunities for customization also sure to inspire professionals.
• High quality (up to 384k sample rate) recordings at 16 bits resolution.

Hobbyists and bat enthusiasts, while using the EM Touch 2, will likely find themselves saying things like "Wow" "Cool" and "Check this out" (possibly even out-loud)...

While professionals, using the EM Touch 2 Pro, will probably find themselves saying things like "Excellent" "That's great!" and "Well done!"... 

The factor which bat enthusiasts (amateur naturalists) will find most satisfying, will likely be the ease-of-use. As well as the aforementioned easy set-up (from box to bat detecting) and intuitive software App.

The key points which bat working professionals will find appealing, are likely to be the variable sample rate, adjustable gain, and level of ID accuracy.
The EM Touch 2 Pro is also the smallest bit of kit they have ever had to carry into the field for bat work. I'm sure Bat Researchers will find this refreshing.

If you are unsure, as to which EM Touch 2 version to choose, I urge you to visit Wildlife Acoustics' Specs Comparison page. All of the features of each version are well laid-out (and very easy to read/compare).
In use, The EM Touch 2 simplifies (nearly automates) the bat detecting portion of a Professional bat survey. It dutifully records, identifies, and logs the bats from the evening's outing.
I would also like to draw your attention to the List Of Compatible Devices for The EM Touch 2 (both iOS and Android devices covered).

 

The fact is, there's quite a bit more to cover about The EM Touch 2 - Including items of interest to those with a Techno-Geek side. Be that as it may, I've decided to post this Part 2 Of 2, and simply add to it (in the near future!)...

Firmware and software updates have already been made to The EM Touch 2. And even as I type,   further updates are in the works at Wildlife Acoustics. All with the aim of improving the performance of this bat detector. 

On a personal note, I've recently relocated to a rural area. There are lots of bats here, and having the opportunity to test The EM Touch 2 has really been a blast! Thank you, to Wildlife Acoustics, for the loan of the equipment. 

I've included some (of the many) links which are currently available on YouTube. The well-made videos, listed below, were produced by Wildlife Acoustics - and as you might expect, they do an excellent job of describing The Echo Meter Touch:
 

Happy bat detecting!

Review Of The Echo Meter Touch 2 Pro Part 1 Of 2

Review Of The Echo Meter Touch 2 Pro from Wildlife Acoustics Part 1 Of 2

The Echo Meter Touch 2 Pro, is the latest Android/iPhone-based bat detector, from Wildlife Acoustics.

The EM Touch 2, is a cutting edge bat recording device, which enables the user to listen to, record, and automatically identify the calls of bats, right on your iPhone/iPad or Android device.

You simply download the free App (developed [and regularly updated] by Wildlife Acoustics) from either The iTunes, or Google Play Store(s) - Plug in the unit, and you're detecting bats!

While the App is running, a live, full-color sonogram display is actively monitoring the air space for bat calls - And displaying the activity on your screen.

The EM Touch 2 would be ideal for someone who would like to detect, identify, and record bats with ease and precision. The ability to install & use this bat detector on the ubiquitous cell phone and/or tablet makes it an attractive choice. 

The Echo Meter Touch 2, would be a good choice for non-Professional users. As well as anyone interested in bat detecting (and automatic identification of bats*). Basically, any Naturalist with a penchant for bats would be well pleased with an Echo Meter Touch 2 (regular or Pro edition). 

*More on this subject in Part 2 of this review...

I was given the opportunity to test and review The Echo Meter Touch 2 Pro. And quickly realized why this particular unit is so popular with Bat Professionals the world over. 
Well, the proper In's & Out's of Wildlife Acoustics' Auto ID App, as well as additional details, etc., will be covered in Part 2 of this review.
I've recently relocated, to a more rural area. I'm very happy to report, that the area is lousy with bats! And The EM Touch 2 Pro is a very welcomed companion!

The unit itself is very small. However, it arrives very well packaged. After opening the small cardboard box, and removing the packing materials/bubble wrap - I opened the (white) Wildlife Acoustics box (shown). This box contained the custom neoprene case, within which I found The EM Touch 2 Pro:

The Echo Meter Touch 2 Pro (United States 25 cent piece shown for scale)

 

As for overall design - In addition to being small in size, The EM Touch 2's are also very light. Being constructed of ABS/Polycarbonate plastic, and weighing less than an ounce, are ideal attributes for something meant to reside on the end of your cell phone (or tablet). These are not prone to falling out/off, etc. So you can plug-in and use with confidence.

Bravo!

The Echo Meter Touch 2 modules utilize cutting edge microphone technology. Wildlife Acoustics chose a new microphone element, which happens to have very good specifications - Which, in turn, has a lot to do with the excellent performance which these modules exhibit. I hope to add a few more details re: this new mic element, in Part 2 of the review - Or in an additional update.

In use, one will become familiar with the overall performance & characteristics of the microphone. I've been very pleased with the overall behavior and character of the microphone. So far, it hasn't broken any "distance records", as in how far away it will pick-up bat calls. But it seems to be performing as well as most other Pro-level detectors I've tested.
Regular readers of this blog may remember, that the distance at which a given detector can pick-up/record bats has always been important to me.

Generally speaking, the Echo Meter Touch App is very intuitive to use. And the transition from: Opening the box -to- installing the (free) App -to- plugging-in (and using) the EM Touch module is a remarkably smooth process.
Another interesting factor to note, is that Wildlife Acoustics are making improvements & adding features to this system - Via firmware and software updates. Something which I can't help but find impressive, and I'm sure will appeal to those considering a purchase.

Several improvements and additions have already been made; and several more are on the way! I will cover these dynamic updates and added features, in Part 2 of this review.

Let's discuss The regular EM Touch 2 first.

The unit itself, is neatly designed (in ABS/Polycarbonate material) and incorporates an integrated acoustic horn:

The EM Touch 2 is a very good choice of bat detector for beginners and casual hobbyists who would like to invest in a quality product.
But there is bit more to it than that:

• To start with, referring to the Echo Meter Touch 2 as simply a bat detector, seems to be a disservice - Because it gives a user the feeling that they have a mini bioacoustics lab in their hand.

• If anything, even the regular EM Touch 2 provides a lot of capability for the price.         

The Echo Meter Touch 2 really shines, when it comes to installing and using the device. It is a remarkably smooth and pleasant process. It really impressed me - It seems that Wildlife Acoustics went to great lengths to insure that the entire set-up, from box -to- bat detecting/recording is practically seamless. Once again, smooth is the word that comes to mind. 

• Install the (free) App on your (Android or iOS) device.

• Plug in The Echo Meter Touch 2.

• Launch App / Select your location.

• Start listening to, and recording bats!

In regards to The EM Touch 2 Pro:

To start with, I found it to be very accurate when providing the auto identification of detected bat species. This was confirmed by cross-referencing the App's findings with "manual" analysis of selected bat calls.

And, it is at precisely this point in my review, where the (usual) detractors of Wildlife Acoustics' auto ID software might begin getting riled up.

Yes. There are about a handful of them. And, as luck would have it, they happen to be the designers, producers, and/or purveyors of what might be considered the competing auto ID software.

For now, I'd like to point-out that many Bat Research Professionals around the world have taken quite a liking to the new EM Touch 2 Pro's and The Auto ID App.

Keep in mind, that The Auto ID App has been developed from Wildlife Acoustics' powerful Kaleidoscope software. A well-known, and robust application with a history of competence, and use, by Professionals worldwide.

Pros:

• A very good value-to-price-point ratio - You're getting a very capable and advanced device for your $179.

• Very accurate Auto ID App for determination of the bat species detected.

• Units utilize cutting edge microphone technology.

• Small, convenient, portable.

Cons:

• Your device (phone or tablet) must be fully charged before beginning an evening of bat detecting.

• Only compatible with a certain number of Android-based devices.

The Echo Meter Touch 2 (either version) may be ordered directly from Wildlife Acoustics, or from Amazon, if that is more convenient.

At the time of this writing, the regular Echo Meter Touch 2 retails for $179 U.S. dollars. And the Echo Meter Touch 2 Pro version for $349 (remember to specify either Android-based or iOS-based device when ordering).
 
To summarize - The Echo Meter Touch 2 detectors make sensitive and accurate bat detecting available to Citizen Scientists, and Bat Researchers alike. Via the affordable EM Touch 2, and EM Touch 2 Pro.

This (Part 1 Of 2) review may get additional updates, in time. 

Part 2 (currently in progress) will address software, recordings, and Auto ID. As well as other factors.

Happy bat detecting!

Review Of The Batseeker 4

The Batseeker 4, is the very latest bat detector from Batseeker.

As many of you may have seen in my recent Batseeker-related posts (featuring many photos) it is a very simple bat detector. The unit arrives (from Canada) in a small padded envelope. Without batteries installed, it's a very lightweight little unit.
Retailing for only $45 U.S. Dollars, it is the least expensive bat detector on the market today. And again, it may also be ordered right from Amazon, if that happens to be more convenient.
Fans of The Batseeker detectors will notice, that this very latest version, has all of the features of previous versions combined. Using the unit could not be any more straightforward: Power on switch on one end, and volume up/down controls near the battery compartment door.

This unit would be ideal for someone wanting to try bat detecting. Or listening to other ultrasonic sounds, for that matter. It is very well suited (and recommended!) for beginners to this great hobby. The Batseeker 4 retains the sleek appearance of it's most recent predecessors (the 2, and 3).

In addition to quick checks of backyard airspace, I've also used The Batseeker 4 for unattended recording, with good results. The Batseeker 4 has plenty of sensitivity. I hope to add some sonograms to this post soon...

Pros:

• Very inexpensive.

Cons:

• Must exercise caution when using, lightweight plastic may not withstand being dropped, etc.

It is a frequency division detector, which for beginners translates to: No knobs or buttons to worry about. In other words, no tuning required (as with a heterodyne detector). To summarize, the Batseeker 4 is the perfect entry-level bat detector. If you've always wanted to hear what your backyard bats sound like through a bat detector - The Batseeker 4 is your ticket.
"Buy the ticket, take the ride"

Happy bat detecting!

A Short Update - Unexpected Level Of Bat Activity Tonight

ser·en·dip·i·ty

ˌserənˈdipədē/

noun

noun: serendipity; plural noun: serendipities
The occurrence and development of events by chance in a happy or beneficial way.

Tonight (June 27th, a bit past midnight) I'm looking out one of my back windows... I was just taking one last look at the sky conditions, to confirm that there would be no possibility of Astrophotography tonight...
I'd also noticed the fireflies, for the first time this year. I even entertained the idea, that I might have seen a Glowworm (female Firefly, of course) but could not confirm.
A neat project which I've been meaning to try, is to get some long exposure photos of large numbers of fireflies in flight. I've seen the wonderful results obtained by other photographers - They look almost ethereal...but I digress.

When seemingly out of nowhere: I glimpsed a bat, foraging; right near the (now massive) entanglement of Porcelain Berry, which has overtaken the Red Cedar trees in my neighbor's yard.
Then another...I grabbed a Batseeker 4 bat detector and placed it on the window sill. Now another fly-by, followed by another...
I really enjoyed listening to their navigating clicks, as well as several feeding buzzes. It was an awesome, and unexpected surprise.
In all of my (many) years of bat detecting here at home, it's always been pretty rare to spot this much bat activity (especially such great visuals!).

Happy bat detecting!